Intelligent manufacturing becomes the driving force of manufacturing transformation

Source：Updated：2017-12-25 08:11:50

Manufacturing occupies an irreplaceable position in our national economy. Since the introduction of "made in China 2025", intelligent manufacturing and related industries have been developing rapidly, not only rapidly expanding into new industries, but also gradually becoming the driving force of China's manufacturing transformation and upgrading.
Intelligent manufacturing becomes the driving force of manufacturing transformation
In recent years, China has issued a series of documents and measures aimed at promoting the development of intelligent manufacturing, creating a relaxed and favorable policy environment for the transformation and upgrading of smart manufacturing and manufacturing industries. At present, this whole set of policy system is continuing to release the policy dividend, and a large number of enterprises have begun to embrace intelligent manufacturing, and the trend of China's manufacturing industry towards the high-end is becoming more and more obvious. With the continuous implementation of targeted measures, the level of intelligent manufacturing in China is expected to improve continuously, and the big target of the strategic and manufacturing transformation and upgrading of manufacturing power will be steadily promoted.

So far, China has introduced a "made in China 2025", "the action guidelines for promoting" Internet + ", "about deepening the manufacturing and the guidance of Internet integration development, and thus formed the manufacturing powers strategic policy system. All the above three policies have detailed plans for the future development of intelligent manufacturing in China.

Miit ministries have also developed the intelligent manufacturing development plan (2016-2020) ", "intelligent manufacturing engineering implementation guide (2016-2020), the robot industry development planning (2016-2020), the equipment manufacturing industry standardization and quality improvement planning", "innovation and development of intelligent hardware industry initiative (2016-2018)", "industrial green development plan (2016-2020)" and so on many segmentation policies, and in 2016, an intelligent manufacturing pilot demonstration work, launched in 2017, made in China 2025 national demonstration zone to create work.

Ministry vice-minister xin guobin reading is introduced into the related policy, long-term implementation of intelligent manufacturing will be the future manufacturing and Internet integration, and improve the international competitiveness of key manufacturing. For this reason, ministry of industry, the development and reform commission, ministry of finance and other ministries in the next phase, continue to promote intelligent manufacturing related policies, in addition to study and formulate for non-ferrous, rare earth, the traditional industries such as textiles, household appliances intelligent manufacturing policy, will be to implement the national policy for the gripper integrated circuit development promote an outline, etc, to speed up the 5 g, the Internet of things, networking, intelligent transportation, and other areas of the new layout.

Under the help of various policy, more and more manufacturing enterprises begin to take the initiative to hug intelligent manufacturing, and actively used cloud computing, big data, robots and other related technologies, intelligent construction and layout of the factory. According to local government statistics, manufacturing enterprises in many regions have been deployed in the field of intelligent manufacturing, and relevant technologies have entered the application level.

"Factory production workshop is enabled, times the speed chain, land and air transport robot intelligent library, six axis robot, and to collect, analyze data and command and control production and intelligent central control system." Tyre co., LTD., general manager of hefei wan force Shi Zheng told reporters, the "economic information daily, all force the tire hefei factory after using a full set of intelligent manufacturing system, the original production of a tire need 48 hours, and the current production time reduced to 30 hours. Traditional tire companies of the same size require more than 2,100 staff, and the hefei wanli factory needs only 696 people, and the average annual output value of the company is 3.32 million yuan, which is three times that of traditional factories.

It's not just the group that sees smart manufacturing potential. In July, tianhe's "ET industrial brain" was introduced into production, hoping to improve production efficiency through cloud computing, big data, artificial intelligence and other technologies. In just A few months, the two sides have achieved remarkable results in their cooperation - A product (which is based on the conversion rate of photoelectricity, with the conversion rate of battery cells at 18.8%) increased by 7%. The next step will be to promote smart manufacturing all online, with annual profits expected to rise to tens of millions of yuan, tianhe told economic information daily.

Ali cloud, xiao-ming hu, ali cloud "ET industrial mind" have already been in jiangsu, guangdong, zhejiang and other mass landing, a manufacturing centre in China golden concord, trina solar, a large number of zhongce rubber manufacturing enterprises have been using this system successfully launch intelligent manufacturing production; In addition, the solution of ali cloud's tianchi zhongzhi platform is also used by many enterprises in many fields such as automobiles and environment. Xiao-ming hu, said ali cloud, all the ability is to let the enterprise realize intelligent manufacturing, "the ability to help China make up 1%, 1% mean for the industry created billions RMB profits".

In have formed the good policy environment and industrial environment, on the basis of our country further by conducting pilot demonstration and promote key projects, has formed a large number of mature experience, and in the large aircraft, rail transportation, 5 g, the next generation of Internet and other important areas and implement the project breakthrough. It is widely believed that the next five to 10 years will be the harvest time for a large number of key projects represented by the C919 and 5G commercial network. At that time, our country's manufacturing level and international competitiveness in these fields will be expected to enter the world class, and related industries will have a round of industrial opportunities.

In addition to such areas as big aircraft, China is also developing a large number of key projects, which will also contribute greatly to the overall transformation and upgrading of China's manufacturing industry in the future. According to the ministry of industry and information technology, in 2016 and 2017, China launched two batches of pilot demonstration projects for intelligent manufacturing, selecting more than 150 key projects to tackle the problem. The pilot demonstration projects covers many manufacturing areas, not only including petrochemical, steel, non-ferrous, aviation, automobile, pharmaceutical, and other traditional manufacturing industry, also involved in spaceflight, aviation, high-end equipment manufacturing, robotics, manufacturing, new energy and so on are actively developing strategic emerging industry in China.

At present, the achievements of many key projects have begun to promote the related industries. Industrial robots, for example, at present our country has become the world's largest industrial robot market, and formed the beijing-tianjin-hebei, northeast, Yangtze river delta, the pearl river delta and central parts of five big robot industry gathering area. According to the international federation of robotics predicts that the future of our country will be dominant in the field of global industrial robot, the sales of industrial robots in China by 2019 will reach 160000 units, accounting for 40% of global sales.